Whilst troubleshooting a network issue, you may need to clear counters on your AOS or Provision switches.
NCB1FGSW01# show int 1/48
Name : Crosslink to Switch2
MAC Address : d4c9ef-846950
Link Status : Up
Port Enabled : Yes
Totals (Since boot or last clear) :
Bytes Rx : 1,832,003,865 Bytes Tx : 3,020,588,712
Unicast Rx : 256,594,027 Unicast Tx : 388,356,220
Bcast/Mcast Rx : 2,468,607,689 Bcast/Mcast Tx : 913,374,224
Errors (Since boot or last clear) :
FCS Rx : 0 Drops Tx : 2688
Alignment Rx : 0 Collisions Tx : 0
Runts Rx : 0 Late Colln Tx : 0
Giants Rx : 0 Excessive Colln : 0
Total Rx Errors : 0 Deferred Tx : 0
Others (Since boot or last clear) :
Discard Rx : 0 Out Queue Len : 0
Unknown Protos : 0
Rates (5 minute weighted average) :
Total Rx (bps) : 39,960 Total Tx (bps) : 53,855,800
Unicast Rx (Pkts/sec) : 3 Unicast Tx (Pkts/sec) : 5
B/Mcast Rx (Pkts/sec) : 12 B/Mcast Tx (Pkts/sec) : 6,366
Utilization Rx : 0 % Utilization Tx : 05.38 %
To clear the interface statistics, the command is clear statistics <interfaces>
if you wish to clear them all, you can use clear statistics all
Switch1# show int 1/48
Status and Counters - Port Counters for port 1/48
Name : Crosslink to NCB1FB1SW03 48
MAC Address : d4c9ef-846950
Link Status : Up
Port Enabled : Yes
Totals (Since boot or last clear) :
Bytes Rx : 43,228,258 Bytes Tx : 3,855,627,717
Unicast Rx : 46,739 Unicast Tx : 67,756
Bcast/Mcast Rx : 108,827 Bcast/Mcast Tx : 57,740,176
Errors (Since boot or last clear) :
FCS Rx : 0 Drops Tx : 0
Alignment Rx : 0 Collisions Tx : 0
Runts Rx : 0 Late Colln Tx : 0
Giants Rx : 0 Excessive Colln : 0
Total Rx Errors : 0 Deferred Tx : 0
Others (Since boot or last clear) :
Discard Rx : 0 Out Queue Len : 0
Unknown Protos : 0
Rates (5 minute weighted average) :
Total Rx (bps) : 42,128 Total Tx (bps) : 53,909,024
Unicast Rx (Pkts/sec) : 3 Unicast Tx (Pkts/sec) : 7
B/Mcast Rx (Pkts/sec) : 12 B/Mcast Tx (Pkts/sec) : 6,388
Utilization Rx : 0 % Utilization Tx : 05.39 %`